0.75kW Stainless Steel VSD Booster Pump

0.75kW VSD Booster Pump

With ultra-low noise levels, a soft-start feature for solar efficiency, and customisable performance with adjustable pressures, our 0.75kW VSD Pump is the ultimate choice for smarter, more efficient water management.

Add our Pump-to-Tank Connector Kit to this pump and seamlessly connect it to a variety of JoJo water storage tanks.

Product Benefits:

• 1-year warranty
• Best efficiency pressure range 2 to 4 bar
• Best efficiency flow range 28 to 56lt/min
• Low noise level
• Adjustable start and shut-off pressures
• Solar compatible (220V)
• Built-in non-return valve for backflow prevention
• Water hammer control
• Leak detection
• Dry run protection
• Over-heat protection
• Over- and under-voltage protection

Important Information:

• Carefully read the instructions before adjusting any settings, as incorrect settings might severely impact performance.
• Recommended suction pipe: HDPE or Helical coil reinforced flexible hose (minimum 1″/25mm)
• Recommended discharge pipe: Copper, HDPE or any SABS approved piping (1″/25mm)
• The pump must be earthed with no strain placed on the electrical cable.
• All maintenance should be carried out with the power supply disconnected.
• The pump is designed for clean water use only, i.e. water containing no solid particles. Pumping muddy water or water containing suspended solids will severely reduce the lifespan of the unit and falls outside of the factory warranty.
• Extending the cable will affect your factory warranty. Always make use of an approved extending plug adapter.
• The pump should be installed in a ventilated, undercover area to protect the unit against direct sunlight, rain and spray from any irrigation system. A JoJo pump cover is recommended for best protection.